Siding nailer and framing nailer are capable of doing the same thing. They shoot almost identical nails; however, the outcome is less than desirable when you are using a framing nailer to shoot siding.
In this article, I’ll be telling you the difference between the two along with their pros and cons and which one you should go for.
Let’s get started.
What is Siding nailer?
It is kind of like a roofing gun, but the angles are different, and it takes different nails.
If you are going to use it for outside projects, then you are going to need stainless nails. It has the ability to take in small nails about an inch to as long as two and a half inches long nails.
It is easy to put in adjustment when you are putting your nail in.
In a siding gun, you will have a nice protector on the front, so when you shoot nails, you are not going to witness any marks.
It has a little groove in it to hold the nails and help them move forward.
In a siding nailer, you have a bump trigger, press it, and press the front part of the gun, and it will rapidly fire the nails.
- Nice finish
- No marks
- Plastic guns
- Made out of metal
- Can be hanged
- Moveable back deflectors
- Can’t see the angle of nails.
- Older ones don’t have a moveable ventilator.
What is a siding nailer used for?
If you are using a siding gun, then ring shanks are smooth, so if you are building a project like building pallets, then you will need ring shanks; it’s just harder to pull out.
Depending on what you are doing, you are going to need different nails.
Coil nails are nice since you can have more of them; if you are doing siding or boards, you are going to need them.
It is used to built houses and for other construction purposes.
What is Framing Nailer?
A framing nailer is a type of gun that is used to shoot nails into a board; it is used to do heavy-duty projects like houses etc.
It comes with a nail holder; load it and then use it. Most newer ones have a red button on the trigger; you push it up and spin it, and it’s ready to fire a nail.
It will only let you shoot one nail at a time.
One good thing about it is that you cannot use it in the air. You have to push it on your board a little bit; it unlocks and then shoots a nail, making it safe to use.
You have to pull it away and push it against the board for every use.
- Heavy duty
- It can be used for building just anything
- Safe to use
- Moveable ventilator
- Leave big marks
- Cannot be hanged
What is a framing nailer used for?
A framing nailer is a rough gun made for high-impact framing for rough millwork and specially made by design to get into tight corners and to toenail with high impact velocity.
Siding nailer is used for remodeling; people can build their houses with it.
Perfect for building an outdoor kitchen and just countless things, it can be as useful as building a New York city with it.
The difference between a siding nailer and a framing nailer
A framing nailer is for high-impact rough work and uses very high velocity, so the result of the finished product is less than desirable.
The siding nailer, on the contrary, is made to go upright, and it’s lighter in weight.
Siding has got an adjustable trigger adjusts the depth of the nail getting shot into the board.
You can have a uniform shot in the siding over and over again.
Siding is protected in the front, so if you are dealing with softer woods like cedar, you won’t leave an impression on wood.
With framing nailer, you are going to get big bites on your board, while with the siding, you will see no mark.
The siding nailer is lighter than the framing nailer.
The siding nailer holds more nails.
Which option is right for you?
The biggest reason you should have a siding gun is that it shoots the nail out and has a nice smooth protector, so it’s not going to make any mark on the boards.
Both the tools are made for different purposes and do the job very well in their own circle.
However, this one drawback of framing a gun makes the siding gun a better option because neatness is, no doubt, an important factor in any project.
Both the guns have their pros and cons; for all the heavy-duty work, you will want to have a framing gun, but if you are avoiding marks and bites on your board, then the siding nailer is for you.
Stay tuned for more!